SS Angle, Channel, Flat, Rod, Fittings & Flanges — Stainless Steel Long Products Guide
Beyond pipes and plates, a complete stainless steel project needs long products and accessories — SS angle, SS channel, SS flat, SS rod (including SS 310 rod), SS ERW pipe, SS 317 pipe, plus SS fittings and SS flanges. As a one-stop stainless steel supplier in Vadodara, Creative Metal Industries stocks all of these in 304, 316L, 321, 310 and duplex grades with full documentation.
SS Angle, Channel & Flat — Corrosion-Resistant Sections
SS angle, SS channel and SS flat provide structural sections where mild steel would corrode — in food plants, dairies, pharmaceutical units, coastal structures and architectural work. Made to ASTM A276 / A479 in 304/304L and 316/316L, SS angles run from 20×20mm to 100×100mm, SS flats from 10mm to 150mm wide, and SS channels in standard profiles. They combine load-bearing capacity with hygienic, easy-to-clean, rust-free surfaces.
SS Rod & SS 310 Rod — Round Bars for Machining
SS rod (round bar) is supplied to ASTM A276 in 304, 316L, 321, 410 and SS 310 grades. SS 310 rod is specifically used for high-temperature components — furnace fixtures, burner parts and heat-treatment baskets that operate up to ~1100°C. Round bars are available from 6mm to 300mm diameter in black and bright-drawn finish, for machining shafts, fasteners, pins and turned components.
SS ERW Pipe & SS 317 Pipe
SS ERW pipe (welded, ASTM A312) is the economical choice for water, dairy, railing and structural applications at low and medium pressure. For severe chemical service, SS 317 pipe offers higher molybdenum content than 316L, improving resistance to aggressive acids and chlorides. Both welded and seamless forms are stocked from 6NB to 600NB across schedules.
SS Fittings & SS Flanges
SS fittings complete every stainless piping system: buttweld elbows, tees, reducers and caps to ASTM A403 (ASME B16.9), and forged socket-weld/threaded fittings to ASTM A182 (ASME B16.11). SS flanges — weld-neck, slip-on, blind, SORF and SWRF — are supplied to ASTM A182 (F304L, F316L, F321, F310, F904L, F51 duplex) per ASME B16.5 and B16.47. All SS fittings and flanges carry mill test certificates.
| Product | Standard | Grades |
|---|---|---|
| SS Angle / Flat | ASTM A276 / A479 | 304, 304L, 316, 316L |
| SS Channel | ASTM A276 | 304, 316L |
| SS Round Bar / Rod | ASTM A276 | 304, 316L, 321, 310, 410 |
| SS 310 Rod | ASTM A276 | 310 / 310S (high-temp) |
| SS ERW Pipe | ASTM A312 (welded) | 304, 316L, 321 |
| SS 317 Pipe | ASTM A312 TP317L | 317 / 317L |
| SS Buttweld Fittings | ASTM A403 / B16.9 | 304L, 316L, 321, 310, 904L |
| SS Forged Fittings | ASTM A182 / B16.11 | F304L, F316L, F321 |
| SS Flanges | ASTM A182 / B16.5 / B16.47 | F304L, F316L, F321, F51 |
Applications
Food & Dairy
SS angle, flat and ERW pipe for hygienic, washable structures and railings in food and dairy plants.
High-Temperature
SS 310 rod and pipe for furnace fixtures, burner parts and heat-treatment equipment.
Chemical Process
SS 317 pipe, fittings and flanges for severe acid and chloride service.
Architectural
SS angle, flat and No.4 finish sections for facades, handrails and decorative structures.
Why Source SS Long Products from Creative Metal Industries?
- One-stop SS supply: Angle, channel, flat, rod, pipe, fittings and flanges from a single source
- High-temp grades: SS 310 rod & pipe and SS 317 pipe in ready stock
- Standards compliant: ASTM A276/A479/A312/A403/A182 with full MTC
- Cut-to-length: Bars and sections cut to your fabrication requirement
- Vadodara dispatch: Same-day across Gujarat, pan-India supply
Frequently Asked Questions — SS Long Products
Do you supply stainless steel angle, channel and flat?
Yes — SS angle, channel and flat in 304/304L and 316/316L to ASTM A276/A479. Angles 20×20 to 100×100mm, flats 10–150mm wide, channels in standard sizes. Used for hygienic, corrosion-resistant and architectural work.
What standard applies to SS fittings and flanges?
SS buttweld fittings: ASTM A403 (B16.9). Forged fittings: ASTM A182 (B16.11). SS flanges: ASTM A182 (B16.5/B16.47). Grades 304L, 316L, 321, 310, 904L and duplex with full MTC.
What is SS ERW pipe used for?
SS ERW (welded) pipe to ASTM A312 is economical for low/medium-pressure service — water, food, dairy, railing and structural use. Seamless SS pipe is preferred for higher-pressure service. We stock both.
Need SS Angle, Rod, Fittings or Flanges?
SS angle, channel, flat, 310 rod, ERW & 317 pipe, fittings and flanges. Vadodara stock, Gujarat delivery.